15
English
English
NOTE:
If an SCR LNB is used, please refer to the manual of the respective LNB to obtain
technical data on user bands numbers and corresponding frequencies. SCR cannot
be combined with any other DiSEqC function. SCR can only work in combination
with an optional multi-output (max. 8) satellite splitter and an SCR LNB. SCR systems
are mainly installed by professional experts, who then assign the User Band and
Frequencies. If such a system is readily installed in your apartment block, refer to the
original installer or the maintenance department of the housing block.
The
Signal Strength
and
Signal Quality
of signal are displayed for convenientness while setting up, at the
bottom at the screen.
The following 3 options will only show when at
Antenna Type
the
DiSEqC 1.2
option is selected.
Go To
The receiver can save up to 64 different positions. First select one Position by pressing
OK
button, then use
Move
by pressing the
t
u
buttons to reach the correct satellite position.
Once the signal is strong enougt select
Save Position
to save this position.
Move
Press
t
u
to adjust the dish position according with the strength signal on the signal bars.
Save Position
Press
OK
to save the Dish position.
8.1.2 Channel Search
Satellite
:
Select a satellite to be configured
Channel Type
:
Choose the kind of channel type you want to install. Available options:
TV
,
Radio
and
TV&Radio
Search Type
:
Set the search type. Available options: One transponder to store the programme of only
one transponder, tivùsat to store tivùsat programmes only, Free-To-Air to store Free-To-Air
programmes only, tivùsat +
Free to air
to store tivùsat and free to air programmes, All to store
all kind of programmes.
Transponder
:
Select the transponder belonging to the satellite selected. In case it has been
selected the option
One transponder
on
Search Type
the receiver will scan only the transponder selected.
Search
:
Press
OK
button to start the search.
8.1.3 Update tivùsat List
It useful to periodically check if a new programme list is available, provided by tivùsat on satellite.
8.1.4 Factory Reset
This option allows you to reset the receiver back to the factory settings, which also clears all stored channels.
You are asked to enter your PIN code. Enter the correct PIN code using the
0~9
buttons. A confirmation
window is displayed. Select
OK
to load factory settings. Select
Cancel
to cancel. Press
EXIT
to leave.
WARNING:
By resetting your receiver to factory default, all your settings and stored channels
will be permanently deleted. Please use this option with caution.
8.1.5 Delete Browsing Data
Use this item to delete browsing data. At the end of the deletion process the receiver will restart automatically.
8.2 Channel
8.2.1 Electronic Programme Guide
This menu item opens the Electronic Programme Guide (EPG).
Use the navigational buttons and the buttons as indicated on screen to select a programme for recording. The
EPG information is maintained by the provider.
