14
PART 2 • English
WARnIng!
By resetting your receiver to factory default, all your settings and stored
channels will be permanently deleted. Please use this option with care.
7.8.3 Information
This submenu shows receiver specific information such as hardware version and software version.
Please have the
Information
screen on hand when you call our hotline. The person who answers your
call might ask for the information given in this screen. Press
EXIT
to leave.
7.8.4 Auto Standby
Auto Standby is a new feature that helps you reduce power consumption. When set to
1Hour/2 Hours
or 3 Hours
, the receiver will switch to standby if it doesn’t receive any commands during this time. Set
Auto Standby
to
Off
to deactivate the automatic standby function. Default is set to 3 hours.
7.8.5 Software update
oAd, over Air distribution
This receiver is equipped with an Over Air Distribution (also called ‘OTA’ Over The Air) software
upgrade function. An ‘Over The Air’ update might not be available in your region. Please visit our
website www.strong.tv or contact your local service hotline for more information about this option.
By selecting ‘On’ the OTA procedure will be executed at the Start Time selected, preferably at night, to
minimise viewing interruption
uSb upgrade
More common way of updating the software, if needed. This feature allows you to upgrade receiver
software via the USB port. When new software is available for your receiver, it can be downloaded
from our website www.strong.tv. Place the software file (unzipped) in the root directory of your USB
storage device (HDD, memory stick etc.) and connect the device to the USB port of the receiver.
Select
USB Upgrade
from the
System
menu and press
ok
to proceed. The upgrade page will now
be displayed. Wait until upgrading finished automatically when the receiver reboots. The ‘Welcome’
screen appears.
noTE:
USB upgrade can only be done from HDD or USB pen drive which is
formatted in FAT32.
