8
PART 2 • English
Via the
pq
buttons.
6.1.1 direct access via the 0~9 buttons
To gain direct access to a certain channel, simply input its number with the
0~9
buttons on the
remote control. Channel numbers can be up to three digits long. Entering a number with less than
three digits is possible. Just wait a few seconds and your receiver will switch to the selected channel
or press
ok
immediately after selecting the channel number.
6.1.2 Channel list
Press
ok
in viewing mode to display the
Channel List
. Use
pq
in the channel list to highlight your
channel of choice and press
ok
once to select the highlighted channel. Inside the channel list it is
possible to use the
Pg+/Pg-
buttons as well in order to scroll page-wise through the list.
TIP:
Use
tu
to toggle between the
All TV List
list and
All Radio List
or press
fAv
in viewing mode for available favourite lists.
6.1.3 using the
pq
buttons
p
switches to the next channel.
q
switches to the previous channel.
6.2 Info banner
While watching TV you can press the
Info
button at any time to access current information about
the channel and event*. Press
Info
twice for extended EPG details about the current channel and
technical details about the current channel.
*Event information is displayed when available. Availability depends on broadcast.
6.3 Selection of audio language
Some channels support a choice of audio formats and/or languages. To select another audio stream,
press
AudIo
in viewing mode. A list with available audio streams will now be displayed. Use
pq
to
select the desired stream and confirm with
ok
. The audio channel as stereo, mono, left and right can
be selected with the
tu
buttons. The
AudIo
button provides a temporary override of the audio
setting in the main menu
Language
.
6.4 Teletext
Your receiver includes a fully featured Teletext. To access Teletext, press the
TTX
button in viewing
mode and use the
0~9
buttons to input the number of the page you wish to see. The coloured
buttons of the remote control allow you to jump to selected pages directly, as indicated on the
bottom of the Teletext screen. Use the
pq
buttons to select one page up or down, use
tu
buttons
to select subpages. Press
EXIT
or
TTX
to get back to viewing mode.
