12
PART 2 • English
Defaults for frequency band plan, LCN and time zone are coupled to this
setting.
Country Region
:
Some countries have more than one time zone, if applicable, you can change
the countries region and time zone.
Antenna Power
:
IIf you use an (indoor) antenna, which requires a 5 V power supply, you can
set this option to ‘On’. The Antenna-in connector will provide a 5 V ‘phantom-
power’ to the antenna. If a passive antenna is used, this option is best left ‘Off.’
Search Type
Select ‘Free’ to search and store only Free-to-Air (FTA) channels or select ‘All’ to
search and store encrypted channels as well.
noTE
Encrypted channels cannot be watched with this unit.
7.6 Time
This menu allows you to set several items for time and change default settings for your personal
situation. Press
tu
to select
Time
and press
ok
. Press
pq
to highlight the submenu of choice and
press
ok
to select. Press
EXIT
or
mEnu
to get back to the main menu.
Time Offset
:
The time offset is best left to ‘Auto’ . The time will be kept by the broadcaster.
The time zone is set according to the country and region selected in the
Channel Search
menu. If necessary, the Time Offset can be changed e.g. for
adapting to Daylight saving time, if the broadcaster should not cater for this.
7.6.1 Timer
This menu allows you to set up to 30 timed events for recording or waking up the receiver. Press
pq
to select
Timer
from the
Time
menu and press
ok
to enter. The receiver will display a list with max. 30
timers, followed by their respective status, if already set. Select the timer you wish to set or edit with
pq
and press
REd
(Add) or
gREEn
(Edit) to proceed. The event menu will now be displayed.
The following settings are available:
Channel Type
:
Choose between
TV
or
Radio
.
Channel No.
:
Choose the channel number you want to record.
Channel Name
:
The channel name will change automatically according to the channel
number.
Start Date (D/M/Y)
:
Use the
0~9
buttons to enter the date for the timed event.
Start Time
:
Use the
0~9
buttons to enter the start time for the event.
End Time
:
Use the
0~9
buttons to enter the end time for the event.
Repeat
:
Choose between
Once
,
Daily
(the timer will be executed every day at same
time) or
Weekly
(the timer will be executed every week, same day at the same
time.
Mode
:
Choose between
View
(the timer will wake up the receiver) or
Record
(the
timer will start to record the scheduled event).
When all settings are according to your wishes, press
ok
to confirm. To quit the timer without saving
your settings, press
EXIT
.
