7
PART 2 • English
English
your language using
tu
. Once you have selected your language, press
q
to move the highlight to
the next item and use
tu
to change.
Language
Here you can choose your language.
Region
:
Select your region where this receiver is used.
Resolution
Select the best resolution to according to your screens specification. 576i up
to 1080p.
Aspect Ratio
:
Use this option to select the aspect ratio of your TV and the preferred
conversion method. Options are:
Auto
(automatic detection of aspect ratio),
4:3 Panscan
(Displays 16:9 widescreen broadcasts full screen on your 4:3 TV),
4:3 letterbox
(black bars on top and under the picture on a 4:3 TV) and
16:9
(use this setting for 16:9 TV sets).
Antenna Power
:
Set to
On
if you use an active antenna. When set to
On
, 5 V will be present at
the RF IN connector of the receiver. Select
Off
for passive antennas.
When all settings have been made, press
ok
to continue.
noTE:
Wrong region selection can lead to missing channels or channels being
stored at wrong positions in the channel list.
The receiver will search for all available channels now. Once scanning is finished, the receiver switches
to viewing mode.
TIP:
If the
Welcome
menu should not appear after switching on the receiver for
the first time, reset the receiver to factory settings by pressing the
mEnu
button and selecting
Restore Factory Default
in the submenu
System
.
(dEfAulT PIn: 1234)
.
5.0 QuICk guIdE To uSIng YouR RECEIvER
We at STRONG understand that you can’t wait to enjoy your new high definition digital terrestrial
receiver. The following quick guide will make you familiar with the basic operation of this device. We
do, however, advice you to read the full manual to get the best performance from your receiver.
To turn your receiver ON or to Standby, use the
q
button on the remote control.
Choose the desired channel with the
pq
buttons. Alternatively, you can digit the channel number
with the
0~9
buttons on the remote control or press
ok
in viewing mode to display the channel list.
The volume can be adjusted with the
tu
buttons.
6.0 oPERATIon
Your new receiver is equipped with several features to make watching TV a true pleasure. This
paragraph describes these features. Please also read chapter
7.0
to get familiar with the menu of your
receiver.
6.1 Changing channels
Following ways are possible for changing channels with your new receiver:
Via direct access using the
0~9
buttons.
Via the channel list through
ok
and the
Pg+/Pg-
buttons.
