6
PART 2 • English
4.0 sTARTIng UP foR ThE fIRsT TImE
Ensure that your satellite signal is of good quality and that all connections are sound. In case of
difficulties or questions, please ask you local dealer for assistance. It is recommended to follow the Setup
Wizard step by step. It will guide you through the basic installation and channel searching process. You
can enjoy digital HD broadcasts within just a few minutes.
4.1 language selection
After turning on the power for the first time, the language selection menu will appear. Choose your
language with
tu
and confirm with ok. In this welcome screen will the most important button
description, be displayed. Once you are ready, press ok to advance to the next step of the Installation
wizard. During any stage of the Setup Wizard, you can press EXIT to get back to the previous screen.
4.2 location selection
Here you can set the Time zone and switch the Summer time OFF or ON.
Use
pq
to move the highlight and
tu
to change settings. Press ok to confirm and to continue.
4.3 output selection
Here you can select the connection type you use to your TV screen. Select HDMI / YUV if you use a
HDMI or a component cable to HD TV screen. Select SCART if you’re using a Scart cable to “normally”
TV screen. If SCART is selected, then select as well they correct size of you TV screen. Use
pq
to move
the highlight and
tu
to change settings. Press ok to confirm and to continue..
note:
HD+ services / channels can only be seen if correct selection is made!
4.4 Channel installation
This receiver is equipped with a new fast channel installation system by Astra 19.2 satellite called APS.
Per default all settings are correctly adjusted for a fast installation on Astra 19.2. Before you press ok
button to start the scan process, first check the Strength and Quality bars on the bottom of this menu.
Green bars indicate a good signal and you can proceed. Yellow bars indicate that the signal condition is
nearly acceptable and Red indicates bad signal. Adjust your dish for maximum possible signal strength
and quality. Once the signal cannot be improved anymore, fix the dish on this position and press ok to
continue and start APS scan process. Once receiver finished this scan process a selection will popup
with View or Next. Select View and press ok to enjoy and watch the digital satellite channels directly.
Select Next if you want to scan for more satellites/channels. Refer to chapter 7.1.1 ChAnnEl sCAn for
detailed description.
note:
If you don’t want to use this option you can press the blUE button to start a
normal auto scan on the selected satellite.
4.5 first activation of your hD+ smart card
Your receiver is already delivered with correct inserted smart card. Although we recommend you to check
that your smart card didn’t get loose during the transport.
If you have ensured that the SC is inserted properly, then you are ready for watching HD+ channels.
Your SC is already activated, so you only need to switch to an HD+ service channel (please see separate
HD+ sheet for HD+ channels reference).
If you have already switched to one of the desired programs, after 10 sec. you will have access to the
HD+ service.
Now you are ready to enjoy the HD+ channels.
