9
PART 2 • English
English
6.7 Recording
Your receiver allows you to make an instant recording of the program you are watching, to an external
USB HDD.
Simply press
4
to start the recording. Press Info button during a recording to see channel and record
time information.
To stop the recording, press
3
button and select ok and confirm with ok button.
The maximum record time of each event is 2 hours.
note:
Please connect an USB storage device with sufficient free space before you start
a recording.
For recording HD broadcast, a high speed device is highly recommended.
On the HD+ channels it can happen that some events are protected and a recording is not possible or
limited in specific concerns.
6.8 Time shift
The Time shift function allows you to pause live broadcast up to 90 minutes and resume normal
watching without missing anything.
Press
2
to freeze the current broadcast. Press
2
again to start time shifted playback. To stop Timeshift,
press
3
.
During the Time shift press EXIT to remove time shift banner and press
u
(PLAY) to recall the time shift
banner. During time shift you can press
5
or
6
buttons to jump within time shift file. Press more times
on these buttons to change the speed. You can choose between 2x, 4x, 8x, 16x and 32x.
On the HD+ channels it can happen that some events are protected and fast forward/ rewind in time
shift is not possible or limited in specific concerns.
note:
Time shift is only working correctly when a fast USB storage device such as
an USB2.0 HDD / USB storage device is connected to the receiver. Further
we recommend you to format the USB storage device to E2FS format for
the proper function of record, playback and Time shift, please see special
conditions in chapter 1.5 UsAgE of EXTERnAl Usb DEvICEs. Distorted
picture and / or audio during Time shift indicate a low USB device speed.
STRONG cannot guarantee for USB devices used. Especially when Timeshift
is activated at channels with high data rate (High quality SD/HD), STRONG
cannot guarantee an accurate Playback of the Time shifted file.
6.9 Playback of recording
After you have already made some recordings with this receiver you can simply play them back. Press
f.lIsT or
u
(PLAY) button to open the Playback List. Use
pq
to select a record you want to playback
and press ok to start. With the RED button you can delete files if you want to make some free space on
your USB device. The recording will be stored with the current event name. You can rename the recording
by pressing the gREEn button. With the YEllow button you can protect a recording with the PIN Code,
before it can be played back or deleted.
7.0 mEnU
All important settings and features of your receiver can be operated from the Menu. It consists of the
following sub-menus: Channel Setup, Control Panel, CAS, Multimedia and Program Guide. Press mEnU in
viewing mode to display the Menu.
Use
tu
to select a sub-menu and
pq
to choose an option. Press ok to advance to the chosen
submenu. Press EXIT to go one step back or press mEnU to go to viewing mode.
