15
PART 2 • English
English
7.5 Program guide
The Program Guide menu allows you access (EPG) Electronic Programme Guide and to set Timers for
wakeup and/or recording.
Choose the desired sub menu with
pq
and press ok to advance.
7.5.1 EPg
The Electronic Programme Guide is a very useful function that allows you to watch programme schedules
and information on screen and to mark programs for recording. Find all detailed descriptions in chapter
6.6 EPg
note:
Availability of EPG data depends on the broadcaster.
7.5.2 Timers
Timers can be used to schedule recordings or to switch to a certain channel at a desired moment. It will
help you not to miss your favourite events. You can set up to 30 Timers.
Use
pq
to select one of the available timers. Press ok to advance. The Edit Timer screen will now
be displayed.
Use
pq
to switch between settings and
tu
or 0~9 to adjust the value of a setting.
Type:
Choose between View, Record or None.
Channel:
Press ok to display the channel list and use
pq
to select the wished channel
for this action.
Press Tv/RAD button to switch between TV channel and Radio channel list.
Confirm highlighted channel with ok button.
Title:
Press ok if you want to give the Timer another name as “Manual Timer xx”.
Use the displayed keypad for insertion.
Repeat:
Choose between Once, Daily, Weekly, Weekdays or Weekend.
Date:
With repeat set to Once: press ok to display the calendar. Use
pqtu
to pick
the date for the recording and confirm it with ok. Then press EXIT to apply the
date to the Timer setting.
With Repeat set to Weekly: Use
tu
to select the day of the week, at which you
want the timer to start.
Time:
Press ok and use the
tu
or ok and
pq
to choose the hour. Use
pq
buttons to enter the minute
tu
or ok and
pq
to choose the minute. Press
EXIT to leave the setting.
Duration:
Use the 0~9 buttons to digit the duration of the timer if you have selected Record.
Once all settings are made, Press RED Save button to store these settings and press EXIT to leave the
Timer menu.
Delete a timer
In order to delete a set timer, select it with
pq
and press ok to select. Press blUE Delete button to
delete and confirm with ok.
8.0 oTA sofTwARE UPgRADE
oTA automatic
The OTA (Over the Air) function automatically takes care that your receiver check if the latest software
is loaded.
Every time your receiver is switched to standby the OTA function will check for an improved software version.
After detection of a newer version, your receiver will display a message, after you switched it ON again.
Then you can download the new SW version. You can select OK to start the update immediately, or you
can select Cancel to start next time. Be aware that download takes around 20 minutes. You can skip the
update process only for five times, afterwards a forced download will be started.
