37
Upgrading one SRT 5020 from another SRT 5020
Make sure both receivers are turned off before undertaking this procedure.
1. Connect a null modem cable between the RS-232 ports of both receivers.
2. Turn on the SRT 5020 that already has the latest software.
3. Turn on the SRT 5020 that needs to be upgraded.
4. Point the remote control at the receiver needing to upgraded and press
UPGRADE
.
The second SRT 5020 is upgraded. When the upgrading is finished, the second SRT 5020 will
restart.
Clearing and resetting data
You can also reset the SRT 5020, either by:
•
clearing all the channels and stations or
•
clearing all channels, stations, preferences and other user settings (thereby restoring the unit to
the default settings it had when it left the factory).
1. Press
MENU
on the remote control.
2. Press
VOL
e
or
VOL
f
until the
Config
option is highlighted.
3. Press
CH
▼
or
CH
▲
until
Clear Data
is highlighted.
4. Press
OK
.
The
Clear Data
window appears.
5. To clear all channels, stations, preferences and other user settings, select
Reset to Defaults
and
press
OK
.
A warning message advising you that if you continue, all settings will be returned to their factory
defaults. To continue, press
OK
; otherwise press
MENU
to cancel.
6. To clear all channels and stations, select
Delete All Channels
and press
OK
.
A warning message advising you that if you continue, all channels will be erased. To continue,
press
OK
; otherwise press
MENU
to cancel.
You will need to rescan in order to view channels or listen to radio stations.
