Stromag EDB Series, Инструкция по монтажу

Страница: 85 / 104

6.3.2 Assembly precision
The max. running tolerances, depending on the reference diameter, must correspond to the table below.
Nominal dimension in mm max. running tolerance in mm
above to
0 10 0,020
10 18 0,020
18 30 0,021
30 50 0,025
50 80 0,030
80 120 0,035
120 180 0,040
180 250 0,046
250 315 0,052
315 400 0,057
400 500 0,063
500 630 0,070
630 800 0,080
800 1000 0,090
1000 1250 0,105
1250 1600 0,125
1600 2000 0,150
2000 2500 0,175
6.3.3 Tightening torques
Tightening torques can be obtained from the dimensional drawing, see section 4.3.
6.3.4 Requirements for the connecting components
The following requirements for the connecting components must be fulfilled:
• Shape and condition of the connecting components must comply with the dimensional drawing, see sec-
tion 4.3.
• The max. running tolerances must correspond to the table under "Assembly precision", see section 6.3.2.
27
Mounting instructions Electromagnetic multi-disc clutch EKE/EKB, EDE/EDB • No. 500-00000 C • 10/2017