Strobel 327D, Руководство по эксплуатации

Страница: 17 / 38

13
BA_327D_A2_200715_en.doc
3.3 Sense of rotation of the machine (Fig. 3)
The correct rotation of the hand wheel is clockwise when looking at it from the front.
Fig. 3
3.4 Motor drive via toothed belt
3.4.1 Tensioning the toothed belt (Fig. 4)
C A U T I O N ! Danger of injury!
To check the tension of the toothed belt, switch off the machine
electrically, pull the mains plug and ensure the machine has
actually stopped by pressing the motor pedal.
The machine must not be operated without a belt guard for the
motor.
The tension of the toothed belt should not be too great. Slight thumb pressure should
be able to push the belt through by approx. 5 mm.
A too little or too great toothed belt tension can deteriorate the positioning of the
machine and therefore impair the function sequence.
Tensioning the toothed belt (Fig. 4):
- Release upper and lower retaining screw (1), (2) at the machine upper part.
- Pull out the motor slightly and tighten the lower retaining screw (2) slightly.
- Tension the toothed belt by swivelling the motor.
- Retighten the upper and lower retaining screw (1), (2).