Strobel 327D, Руководство по эксплуатации

Страница: 34 / 38

30
BA_327D_A2_200715_en.doc

Uneven stitching
Possible reasons:
-
frequently worn or damaged needles
-
height of Stitch plate or needle slide plate incorrectly adjusted
-
unsuitable needle thickness (too thin)
Solutions:
-
Replace damaged needle. Check adjustments and correct if necessary. Use
correct needle thickness.

Missing loops
Possible reasons:
- incorrectly adjusted or badly adjusted hook
- hook timing too small or too big
Solutions:
- Turn machine by hand and check hook motion. The cause can usually be
seen.
- If necessary, also correct thread tension or thread tension spring.
- correct hook timing.

Loops become stuck
Possible reasons:
- thread tension too slack
- needle not tacking
Solutions:
-
Check thread tension or thread tension spring
-
Check stitch depth (even for skip stitch or plunger lowering)

Machine does not start
Possible reasons:
-
Control fault
-
Mechanical damage
Solutions:
-
Switch machine off and on again
-
Rectify mechanical faults
-
Check programming. If necessary, call customer service.