Strima AUDACES Jet Lux Plus, Инструкция по эксплуатации

Страница: 39 / 42

AUDACES
39
Chapter 8 Solutions
8.1 General Problems
Problems Possible
reasons
Solutions
Indicator light
of power source
is not on.
1. Connecting of
power source
1. Check whether the power
cord is connected correctly.
2. Check whether the power
switch is set to ON
No short
sound of “di”
after switching
on the plotter.
1. Switch off the
plotter and then
switch it on
immediately.
1. Please switch on the plotter
10 seconds later after switching
it off.
Marker files
have been
printed but
nothing is plotted
on them.
1. The plotter is
not switched on.
2. There are
problems with the
cable.
3
．
Plotter model
is wrong.
1. Check whether the plotter
is working in the normal state.
2. Check whether the cable is
connected correctly.
3. Choose correct plotter
model.
Output of
marker files is
stopped.
1. The plotter is
in the suspending
state.
1. Check the indicator light of
pause and exit the suspending
status.
Marker files
could not be
plotted.
1. Check
whether the USB
connection is
correct
2. Check
whether the
setting of the USB
driver is correct.
1. Connect the computer and
the plotter correctly by using
USB cable line.
2. Reset the USB driver
If the problems could not be solved according to the above solutions,
please contact your supplier.
8.2 Software errors
Problems Possible
reasons
Solutions