Strima AUDACES Jet Lux Plus, Инструкция по эксплуатации

Страница: 19 / 42

AUDACES
19
6.2 Running the software and interface of the software
6.2.1Running the software
Start the computer, enter the Windows system, and this program will be
started automatically. You can also click Start/Program/Start-up Program of
Audaces Ultraspool 8 in the Start menu to run the program. After the program
is started, it will be in a minimized state. Click AUDACES in the taskbar, an
icon (main interface) appears as shown in the figure (Figure6-3).
Figure6-3
Click <Setup>-<Plotter Type>,
select “plotter type” according to your plotter,
there are one head, two head and four head three types, as below
picture(Figure6-4)
：
Figure6-4
The program will automatically detect the plotter is on line or not. If the
plotter has been correctly connected with the computer and powered on, the
green light in the bottom left corner of the Control Center is on, which shows
that the plotter is idle and the Plot button is available. Otherwise the red light is
on, and if click the Plot button,
“not connect the plotter” box will pop up.
6.2.2 Plotting