44
Explosion Hazard
CLEANING
●
Do not operate the Jump Starter in explosive atmospheres, such as in the presence of flammable liquids,
gases, or dust.
●
Ensure the positive terminal clamp does not come into contact with fuel lines (e.g. petrol pipe)!
●
Put the power off before cleaning. Never clean while using the Jump Starter.
●
A soft dry cloth is recommended for cleaning the exterior of the Jump Starter.
●
Be careful not to put too much pressure on the display, switch or push button while cleaning.
●
Do not immerse the Jump Starter in water or any other liquids. It is not allowed to rinse the device with
water, to prevent the water from leaking into the electrical circuit and causing malfunctions.
●
Under no circumstances use aggressive cleaning agents, cleaning alcohol, or other chemical solutions since
these can penetrate the housing or impair functionality.
●
Do not use a wire brush, steel wool, or other abrasive objects for cleaning.
●
Cleaning must not be performed by children.
MAINTENANCE & SERVICE
●
The Jump Starter does not require any maintenance.
●
You may not reconstruct, self-repair, or disassemble the Jump Starter.
●
Check regularly for damage and severe wear.
●
Do not attempt to open the Jump Starter for maintenance. Removing the
housing or improper reassembly may cause electric shocks, damage, short
circuit, or fire.
●
If for any reason you open the housing, the warranty will become null and
void. The device contains no user-serviceable parts.
●
To obtain maintenance or service, please contact us first at our email
address [email protected]. Repairs should only be carried out by an expert or a
qualified shop.
WARNINGS:
