33
HOW TO USE THE JUMP STARTER?
●
The Jump Starter is designed to boost a vehicle battery that has been
unintentionally drained or weakened. This Jump Starter may not start a vehicle
with a battery that is completely dead or damaged.
●
Before attempting to jump-start your vehicle, please read your vehicle owner’s
manual to ensure there are no specific steps needed.
●
Do not crank the engine for more than 4 continuous seconds while the Jump
Starter is connected to the battery. If the engine fails to crank or start, there
may be a problem other than a discharged battery.
●
If the vehicle does not start immediately, please wait for 1 minute to allow
the Jump Starter to cool down.
Do not try to restart the vehicle after three
consecutive attempts as this may damage the Jump Starter.
Check your
vehicle for other possible reasons why it will not restart.
●
Make sure that the Jump Starter has
≧
30%
power. When less than 30% do not use it to
jump-start a vehicle.
●
Do not connect the unit to a vehicle battery
with a voltage > 12V.
●
Remove the vehicle key from the ignition.
●
Insert the battery clamp at the end of the
Jumper cables to the Jump Starter.
Jump Starting Vehicles
①
②
