Page 1 of 4
Installation & Operating Instructions
Please read these instructions before use
The IRBC range is a new generation of brake controllers that can operate in both Inertial controlled and
Preset brake force utilising microprocessor and Tri-axis Accelerometer technologies. It is a compact,
rugged, electronic brake controller and is easily installed with the connection of four wires and the easy
plug in remote control. Easily adjustable via the remote control which can be located up to 1m from the
controller. Both models also incorporate an over-ride function for manual control.
Designed for both single and dual axle trailers using negative earth (ground) systems only.
Available in 12V & the new 24V version eliminating the need for a separate reducer on 24V systems.
Specifications
IRBC-12
IRBC-24
Minimum Input Voltage
9 VDC
18 VDC
Nominal Input Voltage
12 VDC
24 VDC
Maximum Input Voltage
15 VDC
30 VDC
Suitable For 12V Trailer Brakes
Yes
Yes
No Current Load
30 mA
Maximum Load
2 Axle / 12A Avg
Dimensions
30mm x 57mm x 90mm
Weight
200g
Models:
IRBC-12 & IRBC-24
12V and 24V
Remote Brake Controllers
Features :
• LED remote indication for brake connected and brake on.
• Small, easy fit single hole dash board mounting Knob with LED built in on 1M of cable fitted with a plug to
mate main unit.
• Easy adjustment via knob rotation in remote
• Inertial or PWM selection Via Knob
• Convenient Over-Ride via knob push in remote
• Can Be mounted at Any Angle.
• Compatible with single filament /Brake bulb systems
Product comes with:
1x
Retaining Nut ( On Unit )
1x
Washer ( On Unit )
1x
Control Knob
1x
Remote Decal
2x
Mounting Screws
(Standard installation)
IRBC -12
IRBC-r3
Unit 2, 110 Station Road, Seven Hills ,NSW, 2147, Australia
Page 1 of 4
