Streetwize Accessories
E-mail: [email protected] www.streetwizeaccessories.com
JUMPSTARTING
1. Turn ignition OFF. Turn off all accessories such as lights, radio, air conditioner, etc...
2. Make sure all switches on the Jumpstart System are turned OFF.
3. Securely connect the Red (+) clamp to your vehicle battery’s positive (+) battery terminal.
4. Check that vehicle is negatively grounded (most vehicles). Securely connect the negative (-) black clamp to the
vehicle chassis, engine block or a non- moving metal part of the vehicle which is verified to be grounded. Do not
clamp directly to negative battery terminal, carburetor, fuel lines, or sheet metal body parts. Check cable
connection polarity indicator.
5. Start vehicle. If vehicle does not start, wait 3 minutes before trying again (failure to wait may damage Jumpstart).
6. After vehicle starts, disconnect the black negative clamp first than the red positive clamp.
SPECIFICATIONS
1. Built-in Battery:
12-Volt Rechargeable Sealed Lead Acid Battery
2. Work Light:
5 x LEDs
3. Compressor:
260 PSI Reading Gauge
4. Inverter:
230 volt AC 200 Watt (400 Watt Peak)
5. 12V Power Port:
12-volt 11A max.
6. Charging Time:
38 hours by AC charger at home
16 hours by DC charger in vehicle
The WEEE symbol
on this product means that this product should be ethically dismantled or recycled to
minimise environmental impact. Please check with your local authority for more information.
IMPORTANT:
ADDITIONAL SAFETY INFORMATION
This Power Station/Emergency Jumpstart is
NOT
intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they are supervised or
have been given instruction concerning use of the Power Station/Emergency Jumpstart by a person responsible
for their safety.
EC DECLARATION OF CONFORMITY
In accordance with EN ISO 170504:2004
We;
The Ace Supply Co Ltd., T/A Streetwize Accessories
Of;
Unit 9, Warth Rd Ind Estate, Warth Road, Bury,Lancashire BL9 9NB
And in accordance with the following Directive(s):
2004/108/EC
The Electromagnetic Compatibility Directive
2011/55/EC
The Low Voltage Directive
2006/42/EC
The Machinery Directive
hereby declare that:
SWPP5 - 5 in 1 Power Station with Air Compressor
is in conformity with the applicable requirements of the following directives:
EN55014-1:2006, EN55014-2:1997+A1:2001, EN55015:2006+A1:2007, EN61541:1995+A1:2000,
EN61000-3-2:2006, EN61000-3-3:2008, EN61558-1:1997+A1:1998+A11:2003, EN61558-2-4:1997,
EN61558-2:17:1997, EN60950-1:2006, EN60335-1:2002+A1:2004+A2:2006+A11:2004+A12:2006
2011/65/EU Verification Testing Of Restriction Of hazardous Substances (ROHS)
Signed by: Name:
Antony Collier - QC Manager
Signed at Bury on 18/12/12
Professional Solutions
5-in-1 Power Station & Emergency
Jumpstarter with Air Compressor
SWPP5
RoHS
COMPLIANT
Lancashire
BL9 9NB
• 900 Amp Battery Jumper
• 260 Psi Air Compressor
• 200 Watt Power Inverter
• 12 Volt Power Station
• Work Light
WELCOME:
This product has been carefully engineered and manufactured to give you dependable operation. Please
read this manual thoroughly before operating your new product as it contains the information you need to become
familiar with its features and obtain the performance that will bring you continued enjoyment for many years. Please
keep this manual on file for future reference.
IMPORTANT:
PRIOR TO USE, READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND INSTRUCTIONS INCLUDED IN
THIS INSTRUCTION MANUAL, AND THOSE PUBLISHED BY YOUR VEHICLE BATTERY MANUFACTURER AND
MANUFACTURER OF ANY DEVICE INTENDED TO BE USED WITH THIS UNIT.
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
LOCATION OF CONTROLS
1. Rubberized Handle
2. Air Compressor On/Off Switch
3. Air Compressor Gauge
4. Heavy Duty Booster Clamps
5. 12V Socket
6. LED Work Light On/Off Switch
7. Voltmeter
8. Battery Status Button
9. 5 LED Work Light
10. Inverter On/Off Switch
11. AC Outlet
12. Air Hose Compartment
13. Jumpstarter On/Off Switch
14. Air Cooling Fan
CAUTIONS
• To protect against electrical hazards, do not immerse
charger, adapters, or unit in water or other liquid.
• Close supervision is necessary when used near children.
• Do not use unit for applications other than its intended use.
• Recharge battery after every use.
• Avoid touching eyes when working with batteries.
• If battery acid comes in contact with skin or eyes, flash with water immediately and get medical attention.
• Remove metal jewelry or objects from your body when using the unit.
• Never allow red and black clamps to touch each other or to touch the same metal object.
• Always connect the red (+) clamp to the positive battery terminal first.
• Do not connect black (-) clamp to the negative battery terminal, connect it to a non-moving metal part on your vehicle.
• Jumpstart vehicles in a well ventilated area only.
• Monitor the pressure gauge during use. Be careful not to over-inflate objects.
WORK LIGHT:
• Simply turn the work light switch
(on front panel) to ON position
• The 5 x LEDs will illuminate.
• Turn OFF while not in use.
IMPORTANT WARNING:
This product is only supplied with a minimal amount
of charge at manufacture, therefore for this product to operate correctly it has
to be fully charged for a period of 38 hours
IMMEDIATELY
after purchase, this
is essential
BEFORE ANY USE!
& cannot be used
DURING
the charge period.
Failure to adhere to these conditions may invalidate the products warranty.
SWPP5 Manual AW:Layout 1 3/4/13 09:52 Page 1
