Streacom F12C, Руководство пользователя

Страница: 5 / 16

5
Remove the Universal Brackets
The case comes pre-installed with the universal brackets for shipping, and
should be removed prior to installing any hardware.
To remove the universal brackets, simply push the retention clips down so
that they snap out of the locking position. The brackets will now be free to
move and can be removed from the case.
Install the PSU
We recommend starting the build by installing the ATX PSU. This secures
directly to the rear panel from the outside using the 4 screws supplied.
The orientation of the PSU can be reversed allowing the fan to be facing
inward or outwards depending on the preference for airflow.
Thanks to the open design of the case, the PSU depth can be up to
320mm, but using oversized PSU’s will also limit the number of drives or
fans that can be fitted to the right side panel.
CS-6#32