Stratasys Dimension BST 1200, Руководство пользователя

Страница: 41 / 68

Dimension BST 1200 / SST 1200 User Guide
Operation 41
Canceling a Job
You can cancel a job at any time while the part is building.
Cancel a job:
1. Press
Pause
.
2. Once Dimension stops building, press
Cancel Build
.
The panel displays
Are you Sure?
3. Press
Yes
. The panel displays
Build Stopped
followed by
the part name.
• The panel prompts you to remove the part and replace the
modeling base (
See “Inserting a Modeling Base” on
page 30. ). Once the chamber door has been opened and
closed, the panel asks:
Part Removed?
4. Press
Yes
only after removing the part - refer to “ Removing a
Completed Part” .
Removing a Completed Part
When the part has completed, the panel displays
Completed
Build
, and the file’s name. It also shows
Remove Part
and
Replace Modeling Base
.
Remove a completed part from the Dimension system:
1. Open the modeling chamber door.
2. Release the modeling base retainers and pull the modeling
base towards you, out of the tray guides.
3. Insert a new modeling base.
4. Close the modeling chamber door.
CAUTION
If you press Yes before removing the
part, the system can be damaged, and a
service call will be required.