Stratasys Dimension BST 1200, Руководство пользователя

Страница: 26 / 68

26 Setup
Dimension BST 1200 / SST 1200 User Guide
D. Enter the IP Address for your printer in the appropriate
field. It will be the same address as the one entered in Step
4 .
E. Select the appropriate printer type from the drop down list.
F. Click ‘Add Printer’ and close the 3D Printer pop-up.
13. If you are unable to connect the printer to your PC, contact
your Network Administrator.
Connecting Directly To Your PC
You can connect the Dimension printer directly to your PC without
the use of a network. This is most easily accomplished with the
printer in Dynamic network mode (as received from the factory).
1. Connect a crossover cable from your printer directly into a
network port on your PC (A 14 foot crossover cable (orange) is
included with the Start Up Kit.)
2. Make sure the printer is ‘on’ and determine the Unique Device
Name (UDN) for your printer.
A. From
Idle
(or
Ready to Build) ,
press
Maintenance
. The panel displays
System
Maintenance
and the software version.
B. Press
Set Network
. The top window displays:
Network
Admin - Dynamic IP Address; UDN
C. The UDN for your printer is listed here. This is preset at the
factory preset and cannot be changed.
3. From your PC, start the CatalystEX application.
NOTE
Detailed instructions for using CatalystEX can be found in the
CatalystEX Help file.
A. From the General Tab, click the ‘Manage 3D Printers’
button.
B. Click the ‘Add from Network...’ button in the lower right
corner of the pop-up.