Features
Distinctive Ringing
72
Strata CIX General Description
Distinctive Ringing
System Availability: All systems
Users sometimes need to distinguish the ringing of one button on their phone from another button
and sometimes stations in close proximity to one another need to distinguish the calls on one desk
from another. Typically, multiple sounds are used to provide this distinction. Distinctive ringing
can be assigned to each
Line
or [DN] button on each telephone.
You can set up to ten different incoming ringing tones for internal, as well as external calls.
Previously, distinctive ring was not provided for internal calls.
Do Not Disturb (DND)
System Availability: All systems
Station users with digital telephones can activate DND to prevent any calls from ringing their
telephone. Callers will hear a fast busy tone when calling stations in the DND mode. Stations in
DND mode can originate calls normally; however, they receive DND stutter dial tone (optional)
when originating calls. With Release 1.3 and higher, users can disable DND stutter dial tone (1/2
sec. burst of busy tone before dial tone) in programming.
Call Forward-Busy will forward calls directed to a telephone with DND set, even if the telephone
has idle [DNs]. Telephones with DND Override capability can ring DND telephones (see
“Do Not
Disturb (DND) Override” on page 94
).
Direct Station Selection (DSS) Buttons
System Availability: All systems
[DSS] buttons can be placed on digital and IP telephones, add-on modules and DSS consoles.
When placed on one of these devices, these buttons serve two functions: to make direct calls or
transfer calls to other stations; and to display the status of other stations and [PDNs].
The [DSS] button is numbered with a station’s [PDN] and when pressed, calls that [PDN]. [DSS]
buttons are not [DN] buttons, so they do not provide dial tone when pressed. The [DSS] button
LED shows the status of the station and [PDN] it represents (idle, busy, DND or ringing). The
[DSS] LED will turn on steady or flash at a unique rate, depending on the status (see “[DSS]
Button Status Display.”
The [DSS] LED displays the telephone’s status for any type of call on any button, including
[PhDN] and
Line
buttons. The [DSS] LED also indicates the status of the station’s [PDN] itself. If
the [PDN] appears as a Secondary DN [SDN] on multiple telephones, the DSS status will display
Busy if any telephone is using the [SDN].
[DSS] Button Status Display
Red, steady:
Busy on a call not connected to your telephone
Green, steady:
Busy on a call connected to your telephone
Red, quick flash rate:
Ringing
Red, slow flash rate:
Do Not Disturb
Содержание CIX100
