background image

CUSTOMER CARE

FAQs
What parts of the appliance can be 

washed in a dishwasher?

• 

Any enamelled parts such as the grill-

pan can be cleaned in a dishwasher, 

as can oven shelves and shelf guides.

What parts must NOT be cleaned in a 

dishwasher?

• 

Parts such as burner skirts and caps, 

control knobs and any cast iron items 

must not be cleaned in a dishwasher, 

they should be cleaned with hot 

soapy water and a nylon brush once 

they are cool enough.

There’s been a power failure and the 

product won’t work.

• 

Switch off the electricity supply.

• 

When the power returns switch the 

electricity supply back on and re-set 

any programmer/clock to the correct 

time of day.

My oven is a single combined oven 

and grill - can I use both functions 

together?

• 

No.  You can only use one or the 

other.

Why is there condensation on the 

doors?

• 

Condensation is caused by hot, moist 

air meeting a cooler surface (i.e. the 

oven door). You cannot always pre-

vent it, but you can minimise it when 

it happens by doing the following:

• 

Pre-heat the oven at a high tempera-

ture before putting food in the oven, 

and cover the food you are cooking 

wherever possible.

• 

Whenever you can, cook wet foods at  

higher temperatures.

• 

Don’t leave food in the oven to cool 

down.

• 

Automatic cooking will normally pro-

duce condensation when the oven is 

cooling down with food inside.

Should the cooling fan continue to 

run once the appliance has been 

switched off?

• 

Yes. This is to make sure that you 

can always touch the control knobs to 

make temperature adjustments, and 

turn your appliance off.

What is a Multifunction oven? 

• 

A multifunction oven combines a va-

riety of features, which are explained 

fully earlier in this book (if fitted), 

it allows you more flexibility when 

cooking.

The neon on my appliance keeps 

going out and coming back on again 

- is this right? 

•  Yes. In most cases the neon (if fitted)

will cycle on and off to show that 

oven is maintaining your temperature 

choice.

Call Customer Care for a Service 

Engineer’s visit if:

•  You find that the oven becomes hot

-

ter at a particular temperature - the 

thermostat may need replacing.

• 

The cooling fan fails to work.

Содержание SEB900MFSe









































Отзывы: