background image

USING THE TOP OVEN - ELECTRIC

When you are cooking keep children 

away from the vicinity of the oven.
Caution:
 The top element gets extremely 

hot when in use, so take extra care to 

avoid touching it.
The top oven is a conventional oven.
*Note: The top oven is not controlled by 

the programmer.
Top Oven Control 
Light Only Mode
Turn the oven control knob towards the   

symbol.

The  first  position  is  the  light  only  mode 

and can be used to aid you in the cleaning 

of your oven.
To switch on the oven
Turn the oven control knob towards the   

symbol past the light only mode.
The top oven is now in conventional 

oven mode and the display will show the 

conventional oven symbol  . 
To set the temperature rotate the control 

knob until the desired temperature is 

displayed. Temperature can be set from 

50°C to 250°C
Oven Functions
To toggle between the oven functions 

touch the centre of the control knob. This 

will change the oven mode to base heat 

only and the base heat symbol   will 

appear on the display.
To switch off, return the top oven control 

knob to the “off” position.
Important:  Never put items directly on 

the base of the oven, or cover the oven 

base with foil, as this may cause the 

element to overheat. Always position 

items on the shelf.
Preheat
During preheat the control knob will 

flash  slowly  to  indicate  that  the  set 

temperature has not been reached. Once 

the temperature is reached the knob will 

illuminate permanently.
Preheat the oven until the control knob 

stops  flashing,  this  will  take  up  to  20 

minutes depending on the temperature 

selected.
The cooling fan
When the top oven is switched on, you 

will hear the cooling fan come on - this 

keeps the fascia and control knobs of the 

appliance cool during cooking. The fan 

may continue to operate for a period after 

the oven control has been switched off.
If you are not preheating the oven, the 

cooking times in the following guide may 

need to be extended, as they are based on 

a preheated oven.
Shelf positions
There are 3 shelf positions which are 

counted from the bottom of the oven 

upwards, so shelf position 1 is the lowest.
When cooking frozen or chilled food, use 

the highest possible shelf position, while 

allowing some clearance between the food 

and the top element.
The oven shelf must be positioned with the 

upstand at the rear of the oven and facing 

up. Position baking trays and roasting tins 

on the middle of the shelves, and leave 

one clear shelf position between shelves, 

to allow for circulation of heat.

Содержание SEB900MFSe









































Отзывы: