STOVES Heritage 1100DF, Руководство пользователя и инструкция по установке

Страница: 20 / 32

Burner caps & heads
Important: Allow the burners to cool
before cleaning.
Caution: Hotplate burners can be
damaged by soaking, automatic
dishwashers (or dishwasher powders
/ liquids), caustic pastes, hard imple-
ments, coarse wire wool, and abrasive
cleaning pastes.
Burner heads are aluminium. Clean
with a moist soapy pad - eg; “Brillo”.
For the burners to work safely, the slots
in the burner head where the flames
burn need to be kept clear of deposit.
Clean with a nylon brush, rinse, and
dry thoroughly.
Important: The burner caps and
heads must be repositioned correctly
so that they sit properly on the hob as
shown below.
Painted, plastic & metal finish
parts
(where fitted)
CONTROL KNOBS
&
PROGRAMMER BUTTONS
,
SIDE PANELS
,
HANDLES
Only use a clean cloth wrung out in
hot soapy water. Take extra care when
cleaning over symbols on fascia panels.
Ensure that control knobs are replaced
correctly, and on the correct control.
Cast iron griddle (if supplied)
Do not use metal implements when
cooking, as they may damage the
non-stick surface.
After cooking allow the griddle
to cool completely before
attempting to remove or clean.
Once the griddle has cooled, remove
any excess fat with kitchen paper
before moving.
The griddle can be cleaned with hot
soapy water and a nylon brush. If any
food residue is left on the griddle,
leave it to soak for a few minutes in hot
soapy water before attempting to
clean it. Do not use caustic pastes,
abrasive cleaning powders, coarse
wire wool or any hard implements, as
they will damage the surface.
Do not clean in a dishwasher.
After cleaning, dry thoroughly then re-
season the cooking surface by wiping
sparingly with a minimum amount of
unsalted vegetable oil, and store in a
dry place. Note that olive oil is
unsuitable for seasoning.
18
incorrect
burner cap not central
incorrect
angled
correct
parallel
burner cap
burner head
CLEANING
25211 03 - Precision 1100DFa 5/8/04 11:46 AM Page 20