Using the Multifunction Main Oven and Conventional Top Oven
Semi Automatic cooking - Duration method
Semi-Automatic cooking procedure for both Main and Top oven:
Use the procedure below, then wait a few seconds for the timer to store the
information.
Select the function you wish to use, once touched the icon will turn green.
You can use any function (including defrost) in either oven for semi-
automatic cooking - apart from the grills.
The temperature display on the left hand side will begin to flash, signalling that
you should either adjust the temperature, or leave it at the pre-set tempera-
ture.Use the on/off control knob to set the temperature you require for cooking.
Please be aware the oven is now operational
.
The cook time icon has now illuminated, once touched the icon will turn
green.
When the timer on the right flashes, enter your required “cooking time”. (Minimum
of 1 minute)
As this is semi automatic cooking, you have only set the length of time you want
the oven to remain on for. You must leave the timer for 5 seconds, this enables
it to store all of the information.
You can programme both the top and main ovens, they will turn off at different
times if required, and will not affect each other in any way.
To programme the second oven, repeat the above procedure.
If you have programmed more than one oven, and wish to view the different settings
simply touch the function icon on the oven you wish to look at - once it turns green,
you are looking at the information for that programme. This also applies for fully
automatic programming - which is explained on page 43.
Automatic Programming
41
08 27317 02 - 900 Genus-AU:08 27317 01 -900 Gen 9/4/08 10:37 Page 44