background image

Cap Lock

Mouthpiece

Cooling Unit Cap

Base Seal Ring  
(small)

Base Seal Ring  
(large)

Upper Screen  
(coarse mesh width)

Cooling Unit Base

Mouthpiece Seal Ring

23 

22 

9. APPLICATION

Using the 

MIGHTY

 Vaporizer

Mount the Cooling Unit on the Vapor-
izer and heat up. This ensures that 
both the Filling Chamber and the ma-
terial to be vaporized are preheated 
and the vaporizing can begin as soon 
as the heating process is completed. 

Caution! Hot surface! 

After using the 

MIGHTY

 Va-

porizer, do not touch the Fill-

ing Chamber until it has cooled down 
again.
Once the Vaporizer has reached the 
set temperature (set and actual tem-
peratures are the same, also signaled 
by a short double vibration) and the 
Mouthpiece is folded out, the inhaling 
process can then begin.

Please note the following about va-
por generation: the more intense the 
vapors, the greater the impairment of 
the flavor. 

A very high intensity (density) 
of the vapor can lead to irrita-
tion of the respiratory pas-

sages from the concentration of the 
aromas and fragrances.
In this case, the temperature should 
be lowered, so that the intensity of the 
vapors is reduced.

The device is not to be used, if 
the user has respiratory tract 
or lung conditions. Depend-

ing on the density, the vapor could ir-
ritate respiratory tracts or lungs, 
which can lead to coughing.

Inhale only half of air you can 
normally manage. Hold your 
breath for a few seconds and 

exhale slowly. It is advisable to delib-
erately concentrate on your breathing 
process. 
After vaporization, turn off the 

MIGHTY

 Vaporizer. To do this, press 

the orange ON/OFF switch for at least 
half a second. The Vaporizer acknowl-
edges the switching off with a short 
vibration.
Pull the power adapter (if it is used) 
from the socket and disconnect from 
the Vaporizer. 
Allow the Vaporizer and the power 
adapter to cool down before they are 
packed away.

10. DISASSEMBLING, CLEANING AND ASSEMBLING

When the vapors are cooled, it is in-
evitable that a small fraction is con-
densed on the internal surfaces of the 
Cooling Unit.
The component parts of the Cooling 
Unit, including the Mouthpiece must 
be thoroughly cleaned on a regular 
basis to guarantee proper operation 
and pure flavor. 

For hygienic reasons, it is also neces-
sary to clean these components when 
the Vaporizer is to be used by a differ-
ent person. 

The condensate can be 
sticky. The Cooling Unit can 
be dismantled more easily 

when it first warmed up. 

Product Overview of the 

MIGHTY

 Cooling Unit

The Cooling Unit consists of: 

Take the Mouthpiece between the 
lips, and inhale slowly and evenly for 
several seconds. 

Содержание Mighty




















Отзывы: