Storch PowerCoat, Руководство по эксплуатации

Страница: 120 / 148

120
7. Warranty
Warranty conditions
A warranty period of 12 months from the date of purchase/date of invoice applies to our tools for commercial custo-
mers. If we have granted an extended warranty period, this said period will be noted separately in the operating manual
for the equipment in question.
Claims
If you wish to claim under our warranty or guarantee, please return the complete equipment and your invoice to our
logistics centre in Berka, postage paid, or send it to one of our authorised service centres.
Your rights under our warranty or guarantee
Claims can only be accepted for material defects or manufacturing errors, and only assuming intended use of the appli-
ance. Wear parts (nozzles, filters, seals) are not covered by such claims. Fitting third party parts, improper use and sto-
rage, and obvious failure to observe the operating instructions will void your warranty.
Repairs
All repairs must be conducted on our premises or by an authorised STORCH service centre.
Technical specifications
Permitted operating pressu-
re
137.8 bar
Weight 2.87 kg
Dimensions:
Length
33.6 cm
Width 12.7 cm
Height 33.9 cm
Sound pressure level 79.5 dBa
Charger:
Charging duration
45 - 75 minutes
Power source 240 V AC
Rechargeable battery:
Voltage 18 V DC, lithium-ion
Capacity 2.4Ah
Storage temperature range 0° C to 50° C
(fluid stuck in the pump will damage the pump. Knocks at
lower temperatures may damage plastic components.)
Operating temperature ran-
ge
4° C to 38° C
(changes to paint viscosity at very low or very high tempe-
ratures may impair the spray device's performance.)
Spray pattern diagnosis
Problem Cause Solution
The spray pattern does not
cover the surface properly.
The diffusor for fine surfaces has been
installed for an unsuitable material.
Ensure that a suitable material is being
used. See "nozzle selection table", page
12
The spray device is worn out. Replace the spray device.
Electrical safety:
The device possesses a voltage range which can pose an electrical hazard to humans and animals. It should only be
unscrewed and / or disassembled by authorised personnel. Similarly, maintenance and repair work should only be con-
ducted by electrical specialists and authorised service centres. The buyer / user operates the device at their own risk and
under their own responsibility.