Storch Hot Box 240, Перевод оригинальной инструкции

Страница: 47 / 64

47
Caution:
Switch the device completely off if the burner remains ac-
tive despite having closed the water jet gun. Immediately
contact customer service.
Switching the unit off
Switch the temperature controller to "O".
Operate the device until the temperature has dropped to
between 40 - 50° C.
Fault Possible cause Remedy
Heating does not reach
the specified tempera-
ture
Switch not in position 1 Switch on
Fuel oil tank empty Top up
Fuel oil filter dirty Clean
Heating coil furred up Decalcify
Flow monitor faulty Replace
Temperature controller not set high enough Set to desired temperature
Temperature controller faulty
Replace
Fan motor not active Burner fuse faulty Replace. Determine cause
System does not ignite Trigger electrodes incorrectly adjusted Adjust
Ignition cable, ignition electrodes,
electrode plugs or ignition transformer
faulty
Check and replace
Insufficient oil
atomisation
Burner nozzle worn Replace
Insufficient oil pressure Set to approximately 8 bar
No oil pressure Oil pump faulty Replace
Catch clutch faulty Replace
Fuel oil filter dirty Clean
Solenoid valve does not
open
Temperature set to an insufficient value Set to desired temperature
Insufficient water volume Determine cause
Heating coil furred up Decalcify
Translation of the original instruction