background image

INSTALLATION INSTRUCTIONS

PART#: SMX-GM725/GM725M
FITS: 

Chevrolet/GMC

•2007-2016 Silverado/Sierra/Suburban/Tahoe

1500 4WD/2WD/AWD

Thank you for choosing SuspensionMaxx for your

 

vehicle. This kit is designed to add 

suspension travel

 

and increase front and ground clearance. Specially

 

designed tools and experience are required to complete

 

the installation properly. These parts should only be

 

installed by a qualified mechanic otherwise an unsafe

 

vehicle and/or injury may result. Consult manufactures

 

service manual for proper torque specifications and

 

procedures. Instructions are supplied for the leveling

 

kit 

installation only. Safety is important. Use safe

 

working 

habits. 

SuspensionMAXX kits are designed to be easily installed 

and completely reversible to the factory supplied settings. 

These instructions are supplied for ease of installation, 

correct procedures and safety. Automotive experience 

recommended.

• Load-rated floor jack

• Safety stands x2

• Wheel Chocks

• Metric tool set

• Torque Wrench

•  Loctite threadlocker for all fasteners

This suspension system will enhance off road performance and increase 

ground clearance. 

Larger tires will increase vehicle roll center height.

 

The vehicle will handle and respond to driver steering and braking dif-

ferently from a stock factory equipped passenger car or truck. Extreme 

care must be used to prevent loss of control or vehicle rollover during 

abrupt maneuvers both on and off-road. Failure to operate this vehicle 

safely can result in vehicle damage, serious injury or death to the driver 

and passengers. 

Always wear your seat belt and reduce your speed, 

avoid sharp turns, inclines and abrupt maneuvers.

 Tread lightly, re-

spect nature and enjoy the Off-Road Experience! Help keep it available 

for future generations.

 

Thank You! 

SuspensionMAXX Inc.

REQUIRED TOOLS

INSTRUCTIONS

WARNING!

Содержание SMX-GM725M

Страница 1: ... supplied for ease of installation correct procedures and safety Automotive experience recommended Load rated floor jack Safety stands x2 Wheel Chocks Metric tool set Torque Wrench Loctite threadlocker for all fasteners This suspension system will enhance off road performance and increase ground clearance Larger tires will increase vehicle roll center height The vehicle will handle and respond to ...

Страница 2: ...ont of strut tower Fig 0 2 For vehicles with Auto ride or Magnetic ride Part SMX 725M ONLY FIG 1 1 FIG 0 1 FIG 1 2 7 View upper strut frame tower NOTICE Wire loom attachment clip locations Pry closely upward on plastic retainers to free from mounting stud threads as these will be reused later 8 Use an 18mm wrench to remove 3 tall tower nuts in triangle arrangement DO NOT REMOVE CENTER STRUT PISTON...

Страница 3: ...TICE We recommend the procedure above Use the alternative method at your own risk 1 Lightly support lower A arm with bottle jack or foot jack 2 Unlock the ABS wire loom clip allowing the ABS wire to be free from the clip FIG 2B 1 3 Loosen upper ball joint nut with 18mm wrench 3 5 threads until an air gap is achieved and the nut spins freely Pry downward on the suspension strike the knuckle with a ...

Страница 4: ...eg LEFT TO RIGHT MUST BE EQUAL 0 25Deg TOTAL TOE 1 8in 1 8in 1 Bolt on adjustable relocation bracket with a 5mm Allen wrench Reference the chart for correct positioning based on the lift of the vehicle Relocate linkage arm into the bracket Both linkage and bracket bolt must be kept in line verti cally Use supplied nut to fasten linkage arm 2 Reconnect strut harness MAGNETIC RIDE CONTROL Continued ...

Отзывы: