9. Reinstall ABS wire into A-Arm Clip.
10. Torque upper 3 strut mount nuts to 25ft/lbs.
11. Reinstall wire loom clips.
12. Install wheels.
13. Perform wheel alignment to specifications below.
WHEEL ALIGNMENT SPECS W/ LEVELING KIT
CAMBER 0.5
Deg. +/-
0.5
Deg.
CASTER 2.0
Deg. +/-
1.0
Deg.
(LEFT TO RIGHT MUST BE EQUAL +/-
0.25
Deg.)
TOTAL TOE 1/8
in. +/-
1/8
in.
1. Bolt on adjustable relocation bracket with a 5mm
Allen wrench. Reference the chart for
correct positioning based on the lift of the
vehicle. Relocate linkage arm into the bracket. Both
linkage and bracket bolt must be kept in line verti-
cally. Use supplied nut to fasten linkage arm.
2. Reconnect strut harness
MAGNETIC-RIDE CONTROL
(Continued)
Height Adjustment Diagram
FIG. 3-1
Vertical
Alignment
FIG. 3-2
