StorCentric NEXSAN E18, Руководство пользователя

Страница: 7 / 41

The cordset specification for the Nexsan E32X/Nexsan E18X in North America is USA IEC C13 to IEC
C14, rated 125V/15A. When applying power to the storage system, use ONLY the IEC power cords
originally supplied with it. Do NOT use other power cords, even if they appear identical to the supplied
cords.
Only a fully-trained Service Engineer is authorized to disassemble any other part of the storage system,
and then only when the storage system is powered off.
All Nexsan E-Series Storage Systems have multiple power connections; as a result, you must remove all
power leads to completely remove power from the storage system.
Revision history
This section lists updates and new material added to the Nexsan E18X and Nexsan E32X Storage
Expansions FRU Removal and Replacement Guide .
P0450137, Rev. B
Updated for technical accuracy, applied new Nexsan template and branding.
NXS-EX2U-MG Rev. 03, October 2014
Added section Take proper ESD precautions on page 18 to the beginning of Chapter 2; updated all
ESD warnings; added ESD warnings to all sections that deal with handling electronic components or disk
drives, each one referencing Take proper ESD precautions .
NXS-EX2U-MG Rev. 02, July 2014
Changed name of document to Nexsan E32X and Nexsan E18X RAID Storage Units FRU Removal and
Replacement Guide ; incorporated information for newly-released Nexsan E32X Storage Expansion; added
information about 16Gb/s Fibre Channel connections to Rear panel on page 12; updated single-controller
and dual-controller configuration information under Adding Modules on page 17.
NXS-EX2U-MG Rev. 01, February 2014
Changed formatting throughout to reflect Nexsan as an Nexsan brand; separated installation content from
FRU replacement content into two documents; changed name of document to
Nexsan E18X RAID Storage
Expansion Units FRU Removal and Replacement Guide
About this manual
Nexsan E18X and Nexsan E32X
FRU Removal and Replacement Guide Nexsan
www.nexsan.com
vii