4. Press the latch on the outside rail of the drive drawer to disengage it.
Figure 2-5: Disengaging the drawer side-rail latch
5. Carefully slide the drawer back into the enclosure, making sure that it is flush with the rest of the front
panel.
6. Turn the drawer lock counter-clockwise to lock the drawer into place.
The
STAT
LED on the front of the drawer turns from amber to green to let you know that the drive
drawer is properly latched. The
DSK
LED lights up green to let you know that all drives are functioning
properly.
7. In the graphical user interface (GUI), go to the
Home
page and verify that the status bar for the new
drive is either blue or gray, meaning that it has been automatically detected and assigned as a pool
spare or that it is unassigned and ready to be used in a new array or assigned as a spare. See
Home
Page
in
Chapter 3
of the
Nexsan High-Density Storage User Guide
for more information.
Chapter 2: Adding Modules
Nexsan E18X and Nexsan E32X
FRU Removal and Replacement Guide
Nexsan
21
2
Содержание NEXSAN E18
Страница 4: ...Glossary 35 Contents iv Part Number P0450137 Rev B www nexsan com Nexsan BEAST and E Series...
Страница 8: ...About this manual viii Part Number P0450137 Rev B www nexsan com Nexsan BEAST and E Series...
Страница 22: ...Adding disk drives 2 22 Part Number P0450137 Rev B www nexsan com Nexsan BEAST and E Series...
Страница 34: ...Central fan tube 3 34 Part Number P0450137 Rev B www nexsan com Nexsan BEAST and E Series...
