7. Press the latch on the outside rail of the drive drawer to disengage it.
Figure 3-9: Disengaging the drawer side-rail latch
8. Carefully slide the drawer back into the unit, making sure that it is flush with the rest of the front panel.
9. Turn the drawer lock counter-clockwise to lock the drawer into place.
The
STAT
LED on the front of the drawer turns from amber to green to let you know that the drive
drawer is properly latched. The
DSK
LED lights up green to let you know that all drives are functioning
properly.
10. In the graphical user interface (GUI), go to the
Home
page and verify that the status bar for the new
drive is either blue or gray, meaning that it has been automatically detected and assigned as a pool
spare or that it is unassigned and ready to be used in a new array or assigned as a spare. See
Home
Page
in
Chapter 3
of the
Nexsan High-Density Storage User Guide
for more information.
Front drive drawer fans
In the event of the failure of a front drive drawer fan, replace the fan assembly by using the following
procedure:
►
To replace the frond drive drawer fans:
1. Determine which drive drawer contains the failed fan by examining the
ENV
LEDs on the front of each
drawer (see
on page 10). A red LED indicates which drawer has the failed fan. The
Home
page of the graphical user interface (GUI) also tells you which fan has failed (see
Home Page
in
Chapter 3
of the
Nexsan High-Density Storage User Guide
).
2. Turn the lock clockwise to unlock the drive drawer (see
).
The STAT LED turns amber to let you know that the drive drawer is unlocked.
CAUTION
: Only open ONE drawer at a time. Fully close and lock each drawer before opening
another one. Failure to do so may overbalance the rack, causing equipment damage or injury
to personnel.
3. Carefully slide the drawer all the way out until the side rail locking tab clicks into place (see
).
CAUTION
: Do not lean on or place any heavy object on an open drive drawer. Doing so may
damage the drawer slide mechanism or overbalance the rack.
Chapter 3: Replacing Modules
Nexsan E18X and Nexsan E32X
FRU Removal and Replacement Guide
Nexsan
29
3
Содержание NEXSAN E18
Страница 4: ...Glossary 35 Contents iv Part Number P0450137 Rev B www nexsan com Nexsan BEAST and E Series...
Страница 8: ...About this manual viii Part Number P0450137 Rev B www nexsan com Nexsan BEAST and E Series...
Страница 22: ...Adding disk drives 2 22 Part Number P0450137 Rev B www nexsan com Nexsan BEAST and E Series...
Страница 34: ...Central fan tube 3 34 Part Number P0450137 Rev B www nexsan com Nexsan BEAST and E Series...
