StorCentric NEXSAN E18, Руководство пользователя

Страница: 30 / 41

4. On the fan assembly at the front of the drawer, press the upper and lower release tabs inward. Then
carefully pull the fan assembly out of the drawer, as shown in Figure 3-10 .
Figure 3-10: Disengaging and removing the front fan assembly
5. Carefully slide the replacement fan assembly into the slot until the two tabs click into place.
6. Press the latch on the outside rail of the drive drawer to disengage it, then carefully slide the drawer
back into the unit, making sure that it is flush with the rest of the front panel.
Figure 3-11: Disengaging the drawer side rail latch
7. Turn the lock counter-clockwise to lock the drawer into place.
The STAT LED on the front of the drawer turns from amber to green to let you know that the drive
drawer is properly latched. The ENV LED lights up green to let you know that the fan is functioning
properly and that the drawer temperature is within specifications.
8. In the Nexsan GUI, go to the Home page and verify that the status bar for the replacement fan
assembly is green. See Home Page in Chapter 3 of the Nexsan High-Density Storage User Guide for
more information.
Rear drive drawer fan assembly
In the event of the failure of a rear drive drawer fan, replace the rear fan assembly by using the following
procedure:
►
To replace the rear drive drawer fans:
1. Determine which drive drawer contains the failed fan by examining the ENV LEDs on the front of each
drawer (see Front panel on page 10). A red LED indicates which drawer has the failed fan. The Home
Rear drive drawer fan assembly
30 Part Number: P0450137, Rev. B
www.nexsan.com
Nexsan BEAST™ and E-Series™
3