Central fan tube
In the event of the failure of a central tube fan, replace the central fan tube assembly by using the following
procedure:
►
To replace the central fan tube assembly:
1. Press down on the latch at the top of the central fan tube, then carefully pull the assembly out of the
unit by the handle. Support the weight of the assembly with your free hand while removing it.
Figure 3-15: Removing the central fan assembly
2. Make sure the new fan tube is right side up. The latch should be at the top.
3. Slide the replacement assembly into the unit until the top latch clicks into place.
4. In the graphical user interface (GUI), go to the
Home
page and verify that the status bar for the
replacement fan tube is green. See
Home Page
in
Chapter 3
of the
Nexsan High-Density Storage User
Guide
for more information.
Chapter 3: Replacing Modules
Nexsan E18X and Nexsan E32X
FRU Removal and Replacement Guide
Nexsan
33
3
Содержание NEXSAN E18
Страница 4: ...Glossary 35 Contents iv Part Number P0450137 Rev B www nexsan com Nexsan BEAST and E Series...
Страница 8: ...About this manual viii Part Number P0450137 Rev B www nexsan com Nexsan BEAST and E Series...
Страница 22: ...Adding disk drives 2 22 Part Number P0450137 Rev B www nexsan com Nexsan BEAST and E Series...
Страница 34: ...Central fan tube 3 34 Part Number P0450137 Rev B www nexsan com Nexsan BEAST and E Series...
