StorageWorks RAID Array 410, Руководство по установке

Страница: 9 / 48

Getting Started – RAID Array 410 for HP-UX
x EK–SMRA3–IG. C01
Verifying User Supplied Hardware and Software (System Requirements)
The StorageWorks RAID Array 410 Subsystem requires the following user-supplied
hardware and software:
•
HP 9000 Series 800 Computer System
•
An available Double-high Adapter Slot
• The associated system hardware manual
•
Appropriate tools to service your computer
•
The HP-UX operating system V 9.04.
Verifying The StorageWorks RAID Array 410 Platform Kit and Subsystem
Components
The Storage Works RAID Array 410 Platform SWHK8-CB Kit provides the following
components:
•
This guide.
•
Release Notes
•
A HP-PB Fast Wide High Performance SCSI Adapter.
•
A BN21K-05 SCSI cable, three meters long, with a right-angle high-density 68-pin
connector on one end and a straight high-density 68-pin connector on the other.
The StorageWorks RAID Array 410 Subsystem SWXRA-Yx provides the following
components:
•
The SWXSC-AA Office Expansion RAID Enclosure User’s Guide.
•
The SWXRC-04 RAID Controller User’s Guide.
•
The StorageWorks RAID Array 410 Subsystem .
•
A cable for connecting the maintenance port of the controller to the serial port of a
personal computer.
•
9-pin to 25-pin adapter
•
Power Cable.
•
Keys.
•
RAID Array 410 Controller Firmware License Keys.
NOTE
Retain the Firmware License Keys information in a safe place. It
may be required to reintialize the RAID Array Controller.
Perform a System Backup
Follow normal procedures to backup your system before installing the subsystem.