Command-Line Management
27
After Successful Management Server Contact
After you see a notification that Management Server contact has
succeeded or the appliance has rebooted itself after configuration with a
USB stick, the firewall engine installation is complete and the firewall is
ready to receive a policy. In a while, the firewall’s status changes in the
Management Client from
Unknown
to
No Policy Installed
, and the
connection state is
Connected
indicating that the Management Server
can connect to the node.
The next step is creating a security policy and installing it on the engine.
See the
Online Help
of the Management Client for detailed instructions.
Command-Line Management
T
To permanently activate the serial console
1.
Log in to the command line (using SSH, keyboard, and display) as
user
root
with the password you have set for the appliance.
2.
Run the command sg-bootconfig --secondary-console
Caution –
When using the command prompt, use the
reboot
command to reboot and
halt
command to shut down the node. Do
not use the init command. You can also reboot the node using the
Management Client.
