Stone RP850D, Руководство оператора

Страница: 24 / 36

- 24 -
OPERATION RP850G / RP850D
Danger:
At the end of work or interruptions, take
measures to prevent unauthorized access to the
ignition key.
OPERATION
1. Allow engine to warm up for 1 to 2 minutes
when idling.
2. Adjust the engine speed control lever to full
load position.
Attention: The engine speed should always be well
below or well above the engaging speed of the
centrifugal clutch * since, otherwise, the clutch linings
will wear very quickly or could even be destroyed!
* ca. 2000 1/min.
- Adjust the direction of travel and speed at the
control lever.
- Guide and steer the machine at the control arm.
LOADING AND TRANSPORTATION
Danger:
- Only use sufficiently strong and secure loading
ramps when loading.
- Secure the machine against rolling or slipping
off and against tipping over.
- Ensure that persons are not put at risk.
- ALWAYS use the fastening points provided
when loading, lashing or lifting the machine.
- NEVER stand or walk under suspended loads.
This is extremely dangerous!
After being loaded onto the means of transportation,
the machine should be:
- Lashed in place (2),
- Lock the tow-bar.
Use the center-of-gravity suspension point (1) in order
to lift the machine.
2
2