Stone RP850D, Руководство оператора

Страница: 19 / 36

- 19 -
OPERATION
RP850G / RP850D
TRANSPORTING THE MACHINE
Only load and transport the machine as specified in the
operating instructions.
Only use suitable means of transport and lifting gear
with sufficient bearing capacity!
Attach suitable slinging means to the points of
attachment provided.
Only use sturdy loading ramps with sufficient bearing
capacity. The ramp inclination must be flatter than the
gradient climbing ability of the machine.
Secure the machine to prevent it from tilting or
slipping.
It is highly dangerous to walk or stand under suspended
loads.
Secure the machine on transport vehicles to prevent it
from rolling, slipping and tilting.
STARTING THE MACHINE
Prior to starting
- Park the machine on level ground.
- Check the engine oil level.
- Check the fuel level.
- Top up missing lubricants according to the
lubrication specifications chart.
- Check screw conditions for tightness.
- Check condition of engine and machine.
- Observe the safety regulations.
- Observe the operating and maintenance
instructions.
- Before putting the machine into service, please
read the operating manual for the engine.
Familiarize yourself with the operating and control
elements and the mode of operation of the machine and
the working environment. This includes, e.g. obstacles
in the working area, bearing capacity of the ground and
the necessary safety provisions.
Use personal protective equipment (safety footware,
hearing protection, etc.)
Check to ensure that all safety devices are firmly in
place.
Do not start the machine if instruments or control
devices are faulty.
Starting
For machines with hand start, only use the safety
cranks tested by the manufacturer and precisely follow
the operating instructions of the engine manufacturer.
To crank-start diesel engines, note the correct position
to the engine and the correct hand position on the
crank.
The hand crank must be turned with maximum force
until the engine starts, otherwise the crank can
rebound.
precisely follow the starting and stopping procedures
specified in the operating instructions and observe
indicator lights.
Only start and operate machine with an electric starter
from the instrument panel.
Starting and operation of the machine in potentially
explosive atmospheres is forbidden!
Starting with battery jump leads
Connect positive to positive and negative to negative
(earthing lead). Always connect the earthing lead last
and disconnect first! Incorrect connection will cause
serious damage to the electrical system.