- 21 -
MAINTENANCE
A. ENGINE--
Daily check the oil levels in the engine
and engine reduction unit. The engine warranty is
VOID
if run without oil . Since there are many
options available on this mixer, consult the ENGINE
MANUAL for specific recommendation as to oil level,
oil type required and frequency of oil changes re-
quired. For
maximum service life from the
engine, follow those recommendations.
B. ENGINE AIR FILTER--
A supply of clean,
unrestricted air is essential for long engine life and
maximum performance. Check the air filter daily and
clean or replace as necessary, again following the
specific instructions found in the ENGINE MANUAL.
NEVER
run the engine without the air cleaner.
C. DRUM SEALS--
Greasing the drum seals is
particularly important, as the lifetime warranty on the
seal is
VOID
if they are not greased properly.
D. TRUNNIONS--
Grease the trunnion to allow easy
turning of the drum.
E. PILLOW BLOCK BEARINGS--
Pillow block
bearings need to be greased after each 40-50 hours of
operation. Use any grade #1 lithium based grease.
F. BULL GEAR--
Lightly grease the bull gear and
pinion after each 250 hours of operation. Avoid over-
greasing as this will attract dirt and accelerate wear.
G. WHEEL HUBS--
Repack (4) tapered roller
bearings in wheel hubs and replace wheel seals. Install
washer and nut. Torque to 20 ft. lbs., back off one
turn, torque to 7 ft. lbs., back off to first slot in nut and
insert cotter key.
NOTE:
Cowl removed for clarity. Do not operate
mixer with cowl removed.
Schedule
Содержание CHAMPION 855PMP
Страница 2: ......
Страница 22: ...22 MAINTENANCE Chart...