Stone CHAMPION 855PMP, Руководство оператора

Страница: 19 / 24

- 19 -
MAINTENANCE
CLEANING
For consistent performance, long life and continued
high quality mixing of plaster or mortar, thoroughly
clean the mixer inside and out at the end of each
day's operation. To prevent lumps of dried plaster
from forming and contaminating future batches of
plaster or mortar, do not allow build up materials to
form on drum guards, around paddles or anywhere
inside the drum.
Before cleaning, shut the engine or motor and
disconnect the spark plug wire or electric cord to
prevent accidental starting. Spray the mixer with
water before the mix dries to remove any
accumulations. Dried mix should be scraped out as
necessary. DO NOT beat on the drum with a
shovel, hammer or other device to break up
accumulations of dried mix, as this will dent and
damage the drum.
NEVER POUR OR SPRAY WATER OVER THE
ENGINE OR MOTOR.
NEVER PUT HANDS OR ANY OBJECT INTO
THE DRUM WHILE THE ENGINE OR
MOTOR IS RUNNING.
ALWAYS DISCONNECT THE SPARK PLUG
WIRE OR ELECTRIC CORD WHEN
CLEANING INSIDE DRUM.
ALWAYS MAKE SURE GUARD LIFTER IS
RECONNECTED TO GUARD BEFORE USING
MIXER, DO NOT OPERATE THE MIXER
WITH DRUM GUARD OPEN OR
REMOVED.WHEEL BEARING
WARNING
LUBRICATION
Fill wheel hub with grease to inside diameter of
outer races and also fill hub grease cap. Never use
grease heavier than 265 A.S.T.M. penetration (No. 2
grade). Grease bearing cone by machine or by hand
method. Force grease between rollers, cone and
cage. (If Ball Bearing Hub: force grease between
balls.) It is not recommended that a pressure grease
fitting be installed on the hub.
HARDWARE
Periodically inspect all hardware on the mixer and
engine / motor. Loose hardware can contribute to
early component failure and poor performance.
NOTE: Some hardware is used to retain parts that
have to move freely for correct operation of this
unit. These items include the guard lifter and drum
guard. The hardware for these items should be snug
enough to prevent excessive play, yet loose enough
to allow the parts to pivot freely.
TOWING
Before attempting to tow this mixer, check the state
and local laws that apply to your intended route and
check the following:
Cleaning/Lubrication/
Hardware/Towing