Stone CHAMPION 855PMP, Руководство оператора

Страница: 20 / 24

- 20 -
MAINTENANCE
WARNING
1.Hitch attached to the towing vehicle securely.
2.Towpole fully extended and bolted to mixer
securely.
3.Safety chain hooked up properly (see illustra-
tion below or decal on mixer front post).
4. Drum in the mixing position and drum latch
engaged, clutch lever in the UP position.
5. Lug nuts and axle mount nuts tight.
6. On extendible axles, axle extended to full
width and adjustment bolts tight.
7. On spring axles--splring mounting hardware
tight, main springs and snubber springs not
cracked or broken.
8. Tires in good shape and at proper infation, for
maximum safety and load capacity tires should
be inflacted to the followintg pressures.
Tire size 4.80 x 12 @ 60 P.S.I.
Tire size 6.50 x 13 @ 32 P.S.I.
DO NOT EXCEED A TOWING SPEED OF 55
MILES/HR (90 KM/HR). FOR POOR ROAD
CONDITIONS OR INCLEMENT WEATHER,
REDUCE SPEED ACCORDINGLY.
Refer to FRAME AND DRUM ASSEMBLY,
STANDARD AXLE ASSEMBLY and SPRING
AXLE ASSEMBLY sections of this manual for parts
identification and location.
BULL GEAR ASSEMBLY
1. Align Bull Gear keyway opposite to gear
mesh.
2. Adjust pinion for tooth alignment and
engagement using .010” feeler gauge.
3. Tighten all four (4) pillow block bolts before
removing feeler gauge.
Towing/Bull Gear Assy