STOLZENBERG TT1800, Руководство по эксплуатации

Страница: 25 / 27

25
Maintenance table
8
- Check the machine for visible damage and malfunctions.
- Empty the dust container.
- Check the broom and roller tunnels for parts that have
got stuck, or dirt particles sticking to them, which narrow
the broom tunnel and restrict the free movement of the
roller brushes.
- Check the fuel status, if required, refill.
- Check the state of the dust filter, clean it if required
8.1 Daily maintenance
- Clean the air inlet at the engine radiator
- Clean the air filter
8.2 Weekly maintenance
- Check the sweeping rollers for wear and foreign bodies,
replace them if required
- Check the length of the bristles of the sweeping roller,
less than 70 mm, please replace sweeping roller
- Check the side broom setting for wear, if required, set it
or replace it.
- Check Hydraulic oil level and check for leaks.
8.3 In addition, every 50 operating hours
- check all the belts for cracks or impermissible elongation
and re-place them if required
- Check bearing for wear
- Check all the seals for damage or correct seating.
- Check the cable connections for firmness, replace faulty
cables
- Check the dust filter, replace if required.
- Check Hydraulic oil filter, replace if required.
- Check the collected dust for foreign bodies and clean it.
- In addition, follow the instructions of the engine
manufacturer.
8.3 In addition, every 100 operating hours
The nameplate with all the important information about this
sweeper is located on the right side (in the driving
direction) on the filter chamber housing.
Nameplate
9
Accessories and spare parts
10
Accessories and spare parts must conform to the
requirements of the manufacturer. This is ensured by using
genuine replacement parts. Spare parts please refer to the
enclosed spare parts list.
Warranty
11
Information on the guarantee and warranty claims can be
found in the General Terms and Conditions (GTC) on the
manufacturer's website.