STOLZENBERG TT1800 Скачать руководство пользователя страница 20

  

ATTENTION! DANGER! –  When working on 
the high-dumping system, the refuse 
container with high-dumping arms must be 
secured against sudden pressure loss in the 
hydraulics system (such as a hose rupture) 
by the maintenance support  
(                 20/5.4.3). There is a danger of 
body parts being crushed when the high-
dumping system is raised or lowered.  A 
second person must cordon off the swivel 
space. The high-dumping system can be 
loaded up to a maximum weight of 250 kg 
(in the refuse container).  

20 

5.3.5  Filter cleaning 

  

ATTENTION! – When cleaning the filter, wear 
gloves and a face mask and ensure that the 
environment is well ventilated. 

5.4   High-dumping system 

5.4.1 Operation of the high-dumping system 
 

Press the switch to raise the refuse container (         ). Press 
the switch (        ) to lower the refuse container. The engine 
must be running for operation. Press the switch (        ) to 
empty the refuse container (tipping). Press the switch (       ) 
to retract the refuse container.     The tipping function can 
only be used when the refuse container is almost 
completely extended. 

Clean the filter by tapping it by hand (        ). Then vacuum the 
filter (       ). If the dirt cannot be removed or there is damage, 
replace the filter. Check that the lower seal is free of damage. 
Never clean the filter wet! If necessary, you can blow out the 
filter with compressed air from the clean side. 

Содержание TT1800




























Отзывы: