STOLZENBERG TT1800, Руководство по эксплуатации

Страница: 11 / 27

Before starting, open the shut-off valve on the gas
cylinder (LPG version only) and check all fluid
levels. Insert the key into the ignition switch ( ).
to start the engine. Turn the key clockwise to
position "0" ( ) to switch on the ignition. Turn
the ignition key further towards "Start" ( ). to
start the engine. After starting, release this. Do not
press the drive pedals.
Check all fluid levels before starting. Insert the key into the
ignition switch to start the engine. Turn the key clockwise
until it audibly engages. The signal lamps of the control panel
light up now. The "preheating" indicator lamp ( )
means that the engine combustion chamber is preheated to
ensure a smooth start. Please wait until the indicator lamp
goes off. Once it goes off, you can start the engine by turning
the key further clockwise. Do not press the drive pedals. After
starting, release the ignition key.
11
Operation
5
5.1 Drive system
Your sweeper is equipped with a combustion engine. We
recommend using the machine only in well-ventilated
rooms. The combustion engines must be retracted during
initial commissioning. The power consumption in the first
50 hours in service must not exceed 70% of the full load
power.
5.1.1 Starting the machine unit diesel
5.1.2 Starting the sweep LPG/Petrol version
ATTENTION! – Seat belts must always be
used during operation.