STOLZENBERG TT1800, Руководство по эксплуатации

Страница: 18 / 27

18
5.2.9 Installation of the side brush
5.3 Dust suction
5.3.1 Operation of the fan
Press the switch to set the fan to position I. The fan remains
active until you press it to the opposite position. Turn the
switch to the 0 position to switch it off. Generally leave the
fan switched on during sweeping. Switch off the fan when
sweeping wet refuse.
Press the switch to position I to activate the vibrator. Turn
the switch to position 0 to switch it off. When the vibrator is
switched on, the dust cake accruing in the filter
(accumulation of dust between the filter pleats) is vibrated
into the refuse container. High filter performance can only
be guaranteed in this way. Depending on the concentration
of dust, we recommend that vibration take place at intervals
of 5 to 10 minutes.
5.3.2 Operation of the filter vibrator
5.3.3 Dismantling the filter
ATTENTION! – Wear a face mask when
removing the filter.
ATTENTION! – Wear gloves, goggles and a
face mask during assembly. Loose parts must
be secured.