STOLZENBERG KSV 1000, Руководство по эксплуатации

Страница: 9 / 35

Sweeper description
11/12/2017
KSV 1000 7
3.2 Safety Devices
The suction sweeper cannot be started unless:
the key-operated switch is in the ON position (1);
the main panelling has been closed properly.
The power supply to motor will be interrupted, if
you open the main panelling;
you turn the key-operated switch to the OFF (O) position.
3.3 Initial Startup
3.3.1 Unpacking and mounting
Open the packaging and carefully lift the machine off the pallet.
Make sure you do not damage the side and rear rubber flaps!
Lift the main panelling at the rear, and take the pins of the hood out
of their nests.
Remove the entire main panelling.
Unscrew the four star handles and remove the outer plastic wash-
ers.
To define the height adjustment of the driving hoop, you will have to
remove the frontal carriage bolts and set it to one of the three
height-levels.
In doing so observe the following:
Upper most position: driving hoop low.
Lowest position: driving hoop high (tall operators).
Push the driving hoop and the driving linkage through the opening
of the control panel.
CAUTION!