STOLZENBERG KSV 1000, Руководство по эксплуатации

Страница: 11 / 35

Sweeper description
11/12/2017
KSV 1000 9
Push the four outer plastic washers on the ends of the carriage
bolts.
Re-fasten the star handles to the carriage bolts.
Place the driving linkage in the borehole of the frontal swivel lever.
Secure this linkage with the set collar.
To mount the lateral brushes, push the lateral brushes on the lateral
brush axle. (see Mounting the lateral brushes, page 15).
Fasten the lateral brushes by sliding the spring plug through the
boreholes of the lateral brushes and the lateral brush axle.
By all means, make sure that the brushes of the lateral brushes are
approximately 5-10 mm from the ground with the lateral brush
lever in raised position!
Should you neglect to adhere to this distance, it will result in poor
sweeping or increased wear and tear of the brushes!
Use unleaded fuel only
Re-attach the main panelling.
Close the main panelling.
The suction sweeper is ready for operation.
CAUTION!