STOLZENBERG KSV 1000, Руководство по эксплуатации

Страница: 30 / 35

Maintenance
28 KSV 1000
The swivel lever has to push the frictional wheel against the fric-
tional roller.
The driving belt has to be freely movable.
The suction sweeper has to move forward.
Carefully actuate the driving lever to move backwards.
The swivel lever has to separate the frictional wheel from the fric-
tional roller.
The driving belt has to be tight.
The suction sweeper has to move backwards.
If the frictional wheel pushes against the frictional roller, the driv-
ing belt has to be freely movable to drive in reverse!
When actuating the driving lever to move backwards the driving
belt has to be tight and the frictional wheel has to be separated
from the frictional roller!
Should these conditions be evident:
re-tighten the back nuts.
re-attach the main panelling.
Should the suction sweeper not move forward and/or backwards: repeat
these adjustments
When making adjustments should the condition arise that while the driv-
ing lever is in no-load condition, the machine, with the engine running,
should "creep" forward or backwards, then the neutral position of the
free wheel has to be adjusted.
To do this, loosen the back nut of the free wheel adjustment.
If the machine "creeps" backwards:
turn the screw of the free wheel adjustment counter clockwise, until
you can move the driving belt freely.
If the machine "creeps" forward:
turn the screw of the free wheel adjustment clockwise to tighten the
pull-back spring.
If the free wheel works properly again:
tighten the back nuts.
5.9 Maintenance chart
5.9.1 Daily maintenance
Check fuel level, refill if necessary.
WARNUNG